Regulation at the connection point
Use measured power at the grid connection as feedback for active power regulation. Closed-loop control guides inverter output as production conditions and requested limits change.
All products
Panoptis PPC
Power control. Closed loop.
Keep power production aligned with the requested limit as conditions change. Panoptis PPC controls generated power in a closed loop using feedback from the grid connection point. The portal shows current control details, such as the requested limit, measured power and controller status, with a live view of the response and a complete operating history.
PANOPTIS PPC
ConnectingClosed-loop power control
Connecting to the live PPC feed…
- Closed-loop power regulation
- Grid commands and measured response
- Authorised operator controls
Control with feedback
Connect the requested limit to the measured response.
See the command, the actual output and the controller’s operating state together. Configure control around your plant and its grid interface.
Grid command handling
Support power setpoints, gradual zeroing and direct zeroing through the configured grid interface. Control settings and measurement sources are selected to suit the installation.
Operator control through the portal
Authorised users can manage local and remote operation, manual mode and manual setpoints. View the current settings and controller status alongside the controls.
A visible, traceable response
Compare requested limits with measured production in live and historical charts. Review controller health, regulation state and inverter output to understand how the installation responds.
How closed-loop control works
Measure. Compare. Adjust.
A requested limit starts the process. Measurements from the connection point provide the feedback for each adjustment.
Measure the output
Read the actual active power at the configured grid connection point.
Compare with the limit
Compare measured power with the requested setpoint to determine the required adjustment.
Adjust inverter output
Regulate production and observe the measured response as the control loop continues.
Updated measurements feed back into the next adjustment, closing the control loop.
Built around your installation
Let’s discuss your power control requirements.
Tell us about your plant, inverters, metering and grid interface. We will help define the PPC configuration and show you how it is managed in Panoptis.
Discuss your PPC projectConnected through Panoptis
Panoptis Monitoring
Complete the operational picture with portfolio monitoring, alarm notifications, energy reports and maintenance workflows.
Explore Panoptis Monitoring